Magnet properties | |
---|---|
Magnet type | Holding magnet |
Material | Neodymium / Rubber Coated |
Strength [N] | 58 |
Holding magnet | |
Outer ØD [mm] | 22 |
Length L [mm] | 12.5 |
Thickness T [mm] | 6 |
Thread M | M4x6.5 |
Weight [g] | 11 |
Max temp. [°C] | 60 |
This rubbercoated holding magnet is ONE POLE. Specialproduced to work with magnetsensors.
All other rubbercoated systems are with multipole. This means that they are stronger on thinner plate/steel sheet because of more magnets in the same system.
Here are for example the difference between this article (61-0519-JT) and our standard rubbermagnet 61-0519-10 (multipole).
The stated forces have been determined at room temperature on a plate in polished steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg ~ 10N). A maximum deviation of -10% compared to the specified value is possible in exceptional cases. Value is exceeded in general. Depending on the type of application (installation situation, temperatures, counter anchor etc.) the forces can be influenced enormously. The indicated values are serving as an orientation.
Success
You have added Rubber coated Holding magnet 22x6x12,5mm male M4x6,5mm 58N ONE POLE to your quotation request.